• Radial Wiper Arms
• Wiper Blades
  

Click Image To Enlarge (Front View)

2P Wiper Motor

 Two Pivot Tandem Radial Wiper System

• Unique tubular tandem radial wiper system
• Supports up to 29 in. (735mm) arms and 32 in. (800mm) blades
• Sweep angles available from 73° to 106°
• Configurable for the majority of cap designs
• Tubular steel stringer available from 21 in. (533mm) to 48 in. (1220mm) in center to center length
• Stringer angles made to accommodate cap radius
• Adjustable support brackets

• Click Image To Enlarge (Front View)

  Cast steel motor-mount bracket can be positioned in different locations to circumvent obstacles
• Exceeds SAE standard durability tests
• Bigger, stronger 17mm pivot shaft with needle bearings and cast aluminum housing
• Cast steel pivot shaft lever and drive arm provide better control and minimize pattern growth
• Stacking delrin link ends fit 16mm spherical bearings to minimize cantilever forces and friction
• Disc mounting system allows ease of installation and minimizes distortion of fiberglass cap
• 3.6 in. (91.5mm) self-adjusting inner support disc adapts to manufacturers’ variations in cap radius
• 3.84 in. (97.5mm) outer disc incorporates bulkhead fitting for cleaner appearance
• Powered by a heavy-duty 38Nm dynamic park motor for less amp draw
• Available in 12V or 24V and low or high side switched

Click Image To Enlarge

230 Unitized Motor Assembly

Standard Left Hand Unitized Assembly

 Standard Right Hand Unitized Assembly

 Standard Left Hand Motor

 Standard Right Hand Motor

• Powerful, adaptable, bolt-on unit
• Sweep angles available from 36° to 127°
• Drives arms and blades up to 28" (700 mm)
• Configurable for radial or pantograph arms
• 30 Nm motor
• SAE standard durability tested
• Compact size will retrofit into existing space
• May be mounted up, down, sideways, or diagonally
• RFI suppression standard
• Water-resistant motor and plug connectors
• Available in dynamic park or coast to park
• Available in 12V or 24V
• Available in low or high side switched
• A variety of pigtail adapter cords available

Click Image To Enlarge

Metro Assemblies

 Metro 1 Heavy Duty Unitized Assembly

 Metro 1A Unitized Assembly

 Metro 1B Unitized Assembly

• Ideal for heavy-duty and thick bulkhead applications
• 38 Nm of stall torque
• Pivot shaft lengths available up to 6” (152mm)
• Drives up to 36” (915mm) wiper arms and 32” (800mm) blades
• Available in 12 and 24 volts
• Two speed, dynamic park motor
• Available in right hand and left hand configurations