Approved Wiper Arm & Blade Length Combinations for the 2D Series Wiper System

Important Information for 90° Sweep Angle Applications

IMPORTANT!

This bulletin describes wiper arm and blade length combinations that are approved for use with AM Equipment series 235, 2D systems operating at a 90° sweep angle.

Exceeding approved arm / blade length combinations will result in drive gear failure and voids the factory warranty.

Notice: Use ONLY Standard Duty wiper arms with a 90° sweep angle Below Windshield Mounting Configuration.

Below Mount Tech Bulletin 2D Arm-Blade

  • Arm length must not exceed 30”
  • Blade length must not exceed 32”

NOTE: Heavy duty arms are not approved for use on below windshield mounting configurations.

An Above Windshield Mounting Configuration can be used with Standard or Heavy Duty arms.

Above Mount Tech Bulletin 2D Arm-Blade

  • Arm length must not exceed 36”
  • Blade length must not exceed 36”

If you have any questions about the appropriate configuration of AM Equipment’s 2D Wiper System, please Contact AM Equipment