Important Information for 90° Sweep Angle Applications
This bulletin describes wiper arm and blade length combinations that are approved for use with AM Equipment series 235, 2D systems operating at a 90° sweep angle.
Exceeding approved arm / blade length combinations will result in drive gear failure and voids the factory warranty.
Notice: Use ONLY Standard Duty wiper arms with a 90° sweep angle Below Windshield Mounting Configuration.
- Arm length must not exceed 30”
- Blade length must not exceed 32”
NOTE: Heavy duty arms are not approved for use on below windshield mounting configurations.
An Above Windshield Mounting Configuration can be used with Standard or Heavy Duty arms.
- Arm length must not exceed 36”
- Blade length must not exceed 36”