The 2P Plug & Play Wiper System
We Custom Build Our Dual Pivot System for Your RV Line
Everyone loves the clear view of the open road you get with those huge windshields on Class A recreational vehicles. But in the rain or snow, it gets to be a challenge to keep that large glass cleared. It needs to be done reliably — as a matter of safety.
The problem with RV windshield wiper systems is the arms and blades get to be so long they start to flex. And the longer they get the more they flex. They flex so much that the sudden change of direction at the top and bottom of the wipe action ends up generating forces that are like cracking a whip. Whiplash causes unwanted wipe pattern growth. We saw in some motor homes that it would be as much as 4 to 6 inches.
In other words, what you thought was a nice wipe pattern all of a sudden has the blades going down over the window moldings at the bottom and whipping off the edge of the windshield at the top. When that happens, wiper system reliability degenerates, sometimes in a real hurry.
Until AM Equipment developed the 2P Series wiper system it was an industry-wide problem.
We needed to control pattern growth. But how?
Well, when we designed our 2P commercial wiper system we asked ourselves,
“Can we go back to our old systems to find everywhere we had a little bit of movement, a little bit of torquing, and take that out?”
When it came to the 2P series platform it turns out that, yes, we could.
Larger Diameter Pivot Shafts Eliminate Torsional Flex
We use 17 mm pivot shafts instead of 1⁄2 inch shafts to eliminate torsional flex.
Patented Motor Drive Arm Design
By eliminating a ball linkage we create a much longer life system without oversweep problems.
A diecast aluminum motor bracket, investment cast pivot arms and a cast drive arm prevent flex during operation.
Improved Ball Socket
We put all the wear on a sleeve bearing pin and use the ball socket just for alignment. That means no slop in the ball joints.
AM Equipment’s Premium Wiper Systems Feature
We designed our patented 2P Series windshield wiper system to be customized right at the manufacturing phase. We ship our products to you ready to install. No assembly or configuration required on your end.
To make your installation as smooth as possible, we look at all the details, large and small. For example, most wiper systems use a DIN arm interface, which has a very narrow torque range for installation. We use a tapered knurl, with a wider torque range—meaning easier installation for you and fewer customer service complaints.
We’ve even thought to include a set of sphere plates with every unit to accommodate normal variations in the thickness of your fiberglass caps. So you get a clean installation in minutes.
Lower Installed Cost
Installing one of our custom manufactured 2P Wiper System on an RV requires tightening only two nuts and plugging the wiper motor and washer system in. When you’re building hundreds of vehicles over the course of a year, saving 20 or 30 minutes of labor with AM Equipment’s Plug and Play installation can add up to real savings.
To use our handy calculator, just fill in all the white cells then click the “Calculate” button to estimate the installed cost savings you’d have with AM Equipment’s 2P Plug & Play Wiper System.
Call Mike Fiske at 541-327-1546 for help in estimating the purchase price of a 2P System.
WIper System Layout & Specification
Would you like help?
Qualified RV Industry designers enjoy individualized layout and specification support from an AM Equipment engineer. Our in-house RV industry specialist works with your team at every step of the design process from initial needs analysis through system design and on to preparation and review of system specifications.
- 2D Design: If you’re starting from scratch, AME will produce a two-dimensional model of your wiper system layout.
- 3D CAD Model: But if you can share your 3-D cab model, we’ll produce a three-dimensional design of your custom wiper system. We can share the result with you either as a CAD file or a PDF print.
- CAD File Formats: We use the latest software, so you can get your custom wiper system’s CAD file in STP, SAT, DWF, DWG, or IGS format.
- Fast Turnaround: Rapid (and we mean rapid) layout turnaround is our hallmark.
Contact me with any questions you have about how AM Equipment wiper systems can bring value to your RV line.
Technical & Functional Guidance
Testing & Performance Standards
Cost & Delivery
By telephone: 1-541-327-1546
(7am-4pm Pacific, M-F)
By email: email@example.com
I look forward to helping resolve all the questions you have.
Download the Wiper System Layout and Specification Guide
We realize that design engineers in the RV industry are working on a tight time budget and we know that you probably don’t have a lot of experience laying out wiper systems. That’s why we’ve created this 15 page reference guide. Our illustrated guide is a good way for you to pick up the basics of windshield wiper systems.
You’ll find it’s also a handy reference when it comes time to specifying a wiper system and related components for the RV you’re designing.
There’s also a questionnaire form that you can use to record and share the information that you’ll use to weigh various wiper configuration options. When you share your answers with AM Equipment engineers, we’ll work with you to configure the best wiper system solution for your particular needs.
Download the Windshield Wiper Questionnaire Form
How Does Our 2P System Compare?
Side by Side Comparison Shows Our 2P Series Wiper System is
Efficient, Easy, & Long Lasting
In December 2013 we conducted a side by side comparison of AM Equipment’s 2P Plug & Play Wiper System and TruVision’s ZD 1631 at our Wiper Engineering Test Facility in Jefferson Oregon. We also performed a standardized dynamometer based test of the wiper motors.
The results of our tests and comparison are summarized in the following sections.
Compare the Features
AM Equipment’s 2P Plug & Play System
- Single motor dual pivot design
- High strength to weight ratio tubular structure
- Low friction bearing mounted pivot shafts
- “Plug and Play” installation, no secondary adjustments necessary
Compare the Motors
We tested the 50 Nm wiper motor shipped with TruVision’s wiper system and the 38 Nm motor that’s shipped with the 2P Plug & Play System. The dynamometer based tests were conducted on November 6, 2013 on the TruVision motor and January 1, 2014 on the AM Equipment motor.
In each test we increased the torque load on the motor from zero until we reached the motor’s stall torque. We also simultaneously measured rotation speed (rpm) and current draw (amp) in order to calculate each motor’s efficiency (electrical power input: mechanical power output).
We’ve summarized the test results in the following figures and table.
Summary of Motor Test Results
There is no advantage to the TruVision 50 Nm motor. It underperformed compared to the AM Equipment 38 Nm motor at all loading factors. The Truvision motor is less efficient and operates at significantly higher temperatures than the AM Equipment model.
- Peak Efficiency
- Average Amp Draw (Low Speed)
- Average Amp Draw (High Speed)
- Maximum Amp Draw at Stall
- Low Speed RPM
- High Speed RPM
- AM Equipment 38 Nm, 2 Speed Dynamic Park
- TruVision 50 Nm, 2 Speed Dynamic Park
The average amp draw of the AM Equipment 38 Nm motor was just over 25% of the amp draw of the TruVision 50 Nm motor, (25.6% at low speed, 26.5% at high speed). Lowering amperage draw can save time and money. The primary benefit of using a lower amp motor is that the associated wiring harness and breakers need not be as large and spare electric capacity is available to operate other systems on the vehicle.
The AM Equipment motor drew less current regardless of torque load. So it is not surprising that the average efficiency is nearly 40 percent greater for the AM Equipment motor.
Efficient motors accomplish more work per unit of electricity consumed. They also have longer insulation and bearing lives, lower waste-heat output, and less vibration — all of which increase reliability.
There is a substantial difference in operating temperature between the AM Equipment and TruVision wiper motors. Higher operating temperature adversely affects circuit breaker performance, motor longevity due to insulation breakdown, and impairs electrical performance.
Even though the average operating temperature of the TruVision 50Nm motor was significantly higher than the AM Equipmnet Series 238 motor, the TruVision motor operated more slowly, particularly at the high speed setting.
High Speed RPM
We noticed that the TruVision 50 Nm motor that was shipped with the ZD 1631 system operated on the slow side, reaching a high speed of only 41.5 cycles per minute.* In contrast, Am Equipment’s 38 Nm reached 60 rpm while operating at high speed.
*Federal Motor Vehicle Safety Standards specify safety standards for various components on a vehicle. FMVSS Section 104 is specifically devoted to wiper systems. These are the minimum standards that wiper systems must must pass for any vehicle cleared for highway use.
We test all the wiper system applications for recreational vehicles at our in-house Engineering Lab so you can rest assured they meet or exceed
Federal Motor Vehicle Safety Standards (FMVSS 104).
That’s why we’re confident that all our products will meet your highest standards for quality and durability. AM Equipment can test your custom system under any conditions you specify.
More Products for the RV Industry
A Pantograph System for Large Glass
Our Patented 2D Series
AM Equipment designed the 2D Series wiper system for large windshield applications where extremely high durability is required
- 35Nm dynamic park motor, available in 12VDC or 24VDC
- Minimum 50° and a maximum 90° sweep
- Use up to 40” arm and 45” blade with AM Equipment’s heavy duty components.