DC Gear Motors

We offer DC gear motors for industrial purposes. AM Equipment’s DC series motors can be installed as Original Equipment, but also serve as top quality replacements for OEM units in RV and truck step-lift assemblies, window lifts, awning extensions, mobility, and many other industrial and discrete applications.


 
208-series-dc-gear-motor.jpg

208 Series DC Gear Motor

  • Single-speed, 8 Nm stall torque
  • 12 V or 24 V
  • 40 no-load oscillations per minute
  • Standard RFI suppression and circuit breaker
  • Clockwise or counterclockwise park available
  • 65°, 85°, 100°, or 110° sweep angles
  • 25 mm (1"), 50 mm (2"), or 75 mm (3") pivot shaft lengths
  • 1/2" knurled drum interface
  • 2 pounds
  • 208 Series engineering prints
  • Contact us to request CAD files
 
210-series-dc-gear-motor.jpg

210 Series DC Gear Motor

 
212-front.jpg

212 Series DC Gear Motor

  • Single-speed, 12 Nm stall torque
  • 12 V or 24 V
  • 35 no-load oscillations per minute
  • Standard RFI suppression and circuit breaker
  • Clockwise or counterclockwise park available
  • 65°, 85°, 100°, or 110° sweep angles
  • 25 mm (1"), 50 mm (2"), or 75 mm (3") pivot shaft lengths
  • 1/2" knurled drum interface
  • 2.4 pounds
  • 212 Series engineering prints
  • Contact us to request CAD files
 
214-front.jpg

214 Series DC Gear Motor

 
5-1-gearbox-dc-gear-motor.jpg

5:1 Gearbox with 214 Series Motor

  • Economical motor/gear package
  • 5:1 gear ratio
  • 70 Nm output shaft stall torque
  • 13 no-load oscillations per minute
  • Over center locking linkage standard; several linkage options available
  • 110 mm (4.25") x 210 mm (8.25") mounting plate
  • Supplied with an AM Equipment 214 Series DC Gear Motor
  • 5:1 Gearbox with 214 Series Motor engineering print
  • Contact us to request CAD files
 
218-series-dc-gear-motor.jpg

218 Series DC Gear Motor

  • 18 Nm stall torque
  • LH or RH housing
  • 12 V or 24 V reversible
  • 95-116 no-load oscillations per minute
  • Various shaft lengths available
  • Steel gears for intermittent use
  • For use with sprockets and drives
  • Can be backdriven
  • 2.6 pounds
  • 218 Series engineering prints
  • Contact us to request CAD files
 
226-series-dc-gear-motor.jpg

226 Series DC Gear Motor

  • 26 Nm stall torque
  • LH housing
  • 12 V or 24 V reversible
  • 78-95 no-load oscillations per minute
  • Various shaft lengths available
  • Steel gears for intermittent use
  • For use with sprockets and drives
  • Self-locking internal gearing
  • 2.7 pounds
  • 226 Series engineering prints
  • Contact us to request CAD files
 
230-series-dc-gear-motor.jpg

230 Series DC Gear Motor

  • 30 Nm stall torque in low speed
  • LH or RH housing
  • 12 V or 24 V
  • Two-speed motor (no-load low speed:  42 oscillations per minute; no-load high speed:  65 oscillations per minute)
  • Available in coast to park or dynamic park configuration for wiper applications
  • Counterclockwise rotation for LH housing; clockwise rotation for RH housing
  • Internal thermal circuit breaker and RFI suppression
  • Output shaft is 11 mm with a DIN 3:1 splined taper
  • Includes output shaft nut
  • 2.5 pounds
  • 230 Series Engineering Prints
  • Contact us to request CAD files
 
235-series-dc-gear-motor.jpg

235 Series DC Gear Motor

  • 35 Nm stall torque in low speed
  • LH housing
  • 12 V or 24 V
  • Two-speed motor (no-load low speed:  30 oscillations per minute; no-load high speed:  50 oscillations per minute)
  • Counterclockwise rotation
  • Internal thermal circuit breaker and RFI suppression
  • Output shaft is 11 mm with a DIN 3:1 splined taper
  • Includes output shaft nut
  • 2.6 pounds
  • 235 Series engineering prints
  • Contact us to request CAD files
 
238-series-dc-gear-motor.jpg

238 Series DC Gear Motor

  • 38 Nm stall torque in low speed
  • LH housing
  • 12 V or 24 V
  • Two-speed motor (no-load low speed:  38 oscillations per minute; no-load high speed:  60 oscillations per minute)
  • Counterclockwise rotation
  • Internal thermal circuit breaker and RFI suppression
  • Output shaft is 11 mm with a DIN 3:1 splined taper
  • Includes output shaft nut
  • 2.6 pounds
  • 238 Series engineering prints
  • Contact us to request CAD files
 
240-series-long-life-dc-gear-motor

240 Series Long Life DC Gear Motor

Available 2nd Quarter 2018

  • Up to 40 Nm stall torque
  • EMI / RFI filtering
  • 65:1 reduction ratio
  • Internal over-current & temperature protection
  • Center ball bearing support with motor can bushing
  • Longer brush length and improved compound for increased brush life
  • Custom output shafts available
  • Optional integrated 2 channel encoder utilizing a 5 volt signal to report speed, direction and incremental position
    • Encoder resolution: 260 pulses per output revolution
    • Sealed connector on rear cover for encoder connection wiring