Windshield Wiper Arms

Standard Duty Wiper Arms
Meets or exceeds FMVSS and SAE standards
Channel is made of UV stabilized composite; extension is powder coated stainless steel; mounting head is cast aluminum; matte black finish; tension spring is stainless steel
Compatible with tapered knurl, 1/2" drum with lever, 1/2" drum with set screw, M6 DIN, and M8 DIN pivot shafts
9x4 mm hookslot (standard) or 14 mm saddle-type blade attachment
Optional wet kit features internal through-channel hose routing, choice of spray nozzle (channel-mounted one-jet, three-jet, or six-jet), and optional check valve

Standard Duty Radial Arms
Fixed arm length up to 710 mm (28")
Blade length up to 710 mm (28")
Adjustable blade angle optional
Extension side bends from right 50° to left 50° in 5° increments

Standard Duty Pantograph Arms
Fixed arm length up to 710 mm (28")
Blade length up to 710 mm (28")
Adjustable blade angle included
Bridge width 32 mm (1.25") or 44.5 mm (1.75")

Standard Duty Double Driver Arms
Fixed arm length up to 760 mm (30")
Blade length up to 810 mm (32")
Adjustable blade angle included
Bridge width 60 mm (2.25")

Standard Duty Adjustable Radial Arms
Length adjustable with a simple push lever
Adjustable angle head
Available with or without washer fluid nozzle
Meets or exceeds FMVSS and SAE standards
Channel is made of UV stabilized composite; extension is powder coated stainless steel; mounting head is cast aluminum; matte black finish
Compatible with tapered knurl pivot shafts
Hookslot (standard) blade attachment
Available with tapered knurl or 1/2” drum mounting
Commercial Duty Wiper Arms
Meets or exceeds FMVSS and SAE standards
Channel and extension are powder coated stainless steel; mounting head is cast aluminum; matte black finish; tension spring is stainless steel
Compatible with tapered knurl, M8 DIN, and M10 DIN pivot shafts
9x4 mm hookslot (standard) or 14 mm saddle-type blade attachment
Optional wet kit features internal through-channel hose routing, choice of spray nozzle (three-jet or six-jet), and optional check valve

Commercial Duty Radial Arms
Fixed arm length up to 760 mm (30")
Blade length up to 810 mm (32")
Fixed blade angle
Extension side bends from right 50° to left 50° in 5° increments

Commercial Duty Pantograph Arms
Fixed arm length up to 760 mm (30")
Blade length up to 810 mm (32")
Adjustable blade angle included
Bridge width 44.5 mm (1.75")

Commercial Duty Double Driver Arms
Fixed arm length up to 860 mm (34")
Blade length up to 810 mm (32")
Adjustable blade angle included
Bridge width 60 mm (2.25")
Heavy Duty Wiper Arms
Meets or exceeds FMVSS and SAE standards
Channel is powder coated stainless steel; extension is galvanized steel with vinyl cover (stainless steel optional); mounting head is cast aluminum; matte black finish; tension spring is stainless steel
Compatible with straight knurl pivot shaft
Hookslot or saddle blade attachment
Optional wet kit features internal hose routing, integrated six-jet spray nozzle, and check valve

Heavy Duty Radial Arms
Arm length up to 1220 mm (48")
Blade length up to 810 mm (32") with 9x4 mm hookslot
Blade length from 900 mm (36") to 1300 mm (52") with 20 mm saddle
Adjustable blade angle fixed at factory
Extension side bends from right 35° to left 35° in 5° increments

Heavy Duty Double Driver Arms
Arm length up to 1220 mm (48")
Blade length up to 810 mm (32") with 9x4 mm hookslot
Blade length from 900 mm (36") to 1300 mm (52") with 20 mm saddle
Adjustable blade angle included
Bridge width 60 mm (2.25")
20 mm saddle required for blades longer than 815 mm (32")