Standard Duty Wiper Assemblies

 
 
208-series-wiper-assembly.jpg
 Radial

Radial

 Pantograph

Pantograph

208 Series Assembly

Up to 46 cm (18") wiper arms / Up to 46 cm (18") wiper blades

  • Single-speed, 8 Nm stall torque motor
  • 12 V or 24 V
  • Radial or pantograph sweep pattern
  • Standard RFI suppression and circuit breaker
  • Clockwise or counterclockwise park available
  • 65°, 85°, 100°, or 110° sweep angles
  • 25 mm (1"), 50 mm (2"), or 75 mm (3") pivot shaft lengths
  • 1/2" knurled drum interface
  • Simple click-in wiper arm and blade installation
  • Compact size
  • Performs well in marine environments
    • Motor has a water-resistant case that also covers all linkages
    • Stainless steel shaft encased in threaded brass improves water and corrosion resistance
  • 208 Series engineering print
 
212-series-wiper-assembly.jpg
 Radial

Radial

 Pantograph

Pantograph

212 Series Assembly

Up to 53 cm (21") wiper arms / Up to 56 cm (22") wiper blades

  • Single-speed, 12 Nm stall torque motor
  • 12 V or 24 V
  • Radial or pantograph sweep pattern
  • Standard RFI suppression and circuit breaker
  • Clockwise or counterclockwise park available
  • 65°, 85°, 100°, or 110° sweep angles
  • 25 mm (1"), 50 mm (2"), or 75 mm (3") pivot shaft lengths
  • 1/2" knurled drum interface
  • Simple click-in wiper arm and blade installation
  • Performs well in marine environments
    • Motor has a water-resistant case that also covers all linkages
    • Stainless steel shaft encased in threaded brass improves water and corrosion resistance
  • 212 Series engineering print
 
230-unitized-wiper-assembly.jpg
 Radial

Radial

 Pantograph

Pantograph

230 Unitized Assembly

Up to 71 cm (28") wiper arms / Up to 71 cm (28") wiper blades

  • Two-speed, 30 Nm stall torque motor
  • 12 V or 24 V
  • Radial or pantograph sweep pattern
  • Standard RFI suppression and circuit breaker
  • Clockwise or counterclockwise park available
  • LH or RH housing
  • May be mounted up, down, sideways, or diagonally
  • Sweep angles available from 36° to 115°
  • Various pivot shaft lengths from 16 to 76 mm with tapered knurl mounting
  • Compact size
  • SAE standard durability tested
  • FMVSS compliant
  • Performs well in marine environments
    • Sealed connector available
    • Stainless steel shaft hardware
  • 230 Unitized Assembly engineering print